Zurücksetzen eines Tasmota-Gerätes ohne WiFi und MQTT zu verlieren

Zum Zurücksetzens eines Gerätes gibt es den Command „REST“. Diesen Command in Verbindung mit dem Parameter-Wert 6 setze das Geräte zurück, aber behält die WiFi und MQTT Einstellungen.

reset 6

Parameter:

1 = reset device settings to firmware defaults and restart (see warning below)
2 = erase flash, reset device settings to firmware defaults and restart
3 = erase System Parameter Area in flash (Wi-Fi calibration and related data) and restart (see warning below)
4 = reset device settings to firmware defaults but retain Wi-Fi credentials and restart
5 = erase all flash and reset parameters to firmware defaults but keep Wi-Fi settings and restart
6 = erase all flash and reset parameters to firmware defaults but keep Wi-Fi and MQTT settings and restart
(Erase of flash can take a few seconds to complete and there is no output during the erase process on the serial or web console)
99 = reset device bootcount to zero